Polyethylene Bucket Liners for Fiberglass Buckets

Polyethylene plastic liners insert into Aerial Tower buckets providing greater electrical insulation for the worker and improved bucket protection. If you cannot find your liner listed below, download PCC's bucket liner worksheet.

New bucket liners must be tested and certified at 50 or 70 kV AC in accordance with ANSI standard A92.2.

ANSI standard A92.2 calls for liners to be periodically (normally, annually) retested.

All liners are NOT equal. PCC liners last longer and weigh less. Why? PCC uses a superior plastic grade not found in any competitors’ liner.

• Tested and Certified at 50 or 70 kV AC
• Meets ANSI 92.2 specification for electrical protection
• Adds to truck’s lift capacity*, PCC liners weigh on average 12% less than competitors.
• Doubles the field life,** saves up to half of the total life cycle cost.
• Guaranteed for two years absent abuse or damage.
• PCC will retest your liner for a nominal fee.***
• PCC maintains inventory on the most popular liners and normally ships same day.

*PCC does not recommend exceeding the manufacturer rating for lift capacity of your vehicle.
**Customers report buying fewer PCC liners than competitive liners in head-to-head comparisons after switching to PCC.
*** If the liner fails and a new liner is purchased from PCC, PCC will waive the retest fee.

PCC has recently developed a unique non-slip material that chemically bonds to the floors of bucket liners. This application does not affect the dielectric function of the liner and is a much better way of providing slip-resistance to a liner than the traditional use of “scuff pads” for the bottom of liners.

©2011 PCC, 8301 Clinton Park Drive, Fort Wayne, Indiana 46825